Solvent based, vegetable oil modified, chemically reactive release agent designed specifically for use on epoxy coated wood forms. VOC<250 g/L
CONCRETE MOLD & FORM RELEASE AGENT
RA-227 Release Oil is a highly effective vegetable oil based release compound formulated with a low degree of solvency. RA-227 Release Oil is recommended primarily for epoxy coated wood forms or fiberglass molds, but can also be used on urethane or elastomeric precast form liners. RA-227 Release Oil contains a chemically reactive base that upon contact with cement alkalinity creates a water-insoluble film on the form’s surface that prevents adhesion or sticking of the concrete. Surface voids and related defects are reduced as the film formation helps promote displacement of trapped air. RA-227 Release Oil is non-staining and safe to use on white or colored concrete to obtain an architectural grade concrete surface. RA-227 Release Oil will not transfer or initiate adverse inter-coat adhesion of subsequent applied coatings, caulks, or sealants. Concrete form surfaces are left free of any residual contaminant build-up, which allows easier cleaning and stripping properties and extends form life.
- Eliminates surface voids on concrete surface.
- Leaves no residual film deposit build-up.
- Non staining, low odor formulation.
- Contains renewable resource (vegetable oil) components for LEED credit.
- Helps keep forms clean for extended production life.
- VOC compliant in all states with the exception of California.
COMPOSITION: Proprietary blend of vegetable oils and surface acting chemicals in a hydrocarbon solution.
VOC COMPLIANCE: RA-227 Release Oil is VOC compliant product safe to use in all states with the exception of California (CARB and SCAQMD). It contains less than 250 g/L (2.08 lb. /gal.) volatile organic compounds which meets existing form release agent VOC (VOM) regulations under the EPA’s National AIM (Architectural and Industrial Maintenance) listings for all states including OTC and LADCO region states.
SHIPPING NAMES: If over 119 gallon single container (tote): NA 1993, Combustible Liquid, N.O.S., Hazard Class Combustible, PGIII, (Compounded Lubricating Oil). Not regulated and no placards required if shipping container is less than 119 gallons capacity. For Combustible Liquid Exemption, refer to CFR 49,173.150 paragraph H.
SHIPPING CLASS: ITEM 155250, SUB 2, LTL 65-CONCRETE RELEASE AGENT
AVAILABLE IN: 5 gallon (18.9 L) pails, 55 gallon (208 L) drums, 265 gallon (1000 L) containers