Solvent based, ready to use, chemically reactive form oil for metal, wood or aluminum molds. VOC <250 g/L
CONCRETE FORM RELEASE AGENT
MSP Release Oil is a highly effective petroleum based release compound recommended for use on metal, aluminum, wood, or fiberglass forms. MSP Release Oil contains a chemically reactive base that upon contact with cement alkalinity creates a water-insoluble film on the form surface that prevents adhesion or sticking of the concrete. Surface voids and related defects are reduced as the film formation helps promote displacement of trapped air. MSP Release Oil is non-staining and will provide an architectural grade, smooth concrete surface. MSP Release Oil will not transfer or initiate adverse inter-coat adhesion of subsequent applied coatings, caulks, or sealants. Concrete form surfaces are left free of any residual contaminant build-up, which allows easier cleaning and stripping properties and extends form life.
- VOC compliant in most states.
- Fortified with renewable resource (vegetable oil) base.
- Improved form cleaning and stripping.
- Leaves no film or build up.
- Eliminates surface voids.
- Provides long form life.
- Available with fragrance.
COMPOSITION: Proprietary blend of oils, surface acting chemicals and rust inhibitors in a hydrocarbon solution.
VOC COMPLIANCE: MSP Release Oil is VOC compliant product safe to use in all states with the exception of California (CARB and SCAQMD). It contains less than 250 g/L (2.08 lb. /gal.) volatile organic compounds which meets existing form release agent VOC (VOM) regulations under the EPA’s National AIM (Architectural and Industrial Maintenance) listings for all states including OTC and LADCO region states.
SHIPPING NAMES: If over 119 gallon single container (tote): NA 1993, Combustible Liquid, N.O.S., Hazard Class Combustible, PGIII, (Compounded Lubricating Oil). Not regulated and no placards required if shipping container is less than 119 gallons capacity. For Combustible Liquid Exemption, refer to CFR 49,173.150 paragraph H.
SHIPPING CLASS: ITEM 155250, SUB 2, LTL 65-CONCRETE RELEASE AGENT
AVAILABLE IN: 1 gallon (3.78 L), 5 gallon (18.9 L) pails, 55 gallon (208 L) drums, 265 gallon (1000 L) containers